Heat Flux Sensor PHF-02/03
PHF-02 and PHF-03 measures the amount of transient heat per unit area of
the surface, and read out the voltage output in mV.
Every single PHF-02 and PHF-03 were individually calibrated with it's own
sensitivity, so that they are very suitable to be used with data logger.
NOTE: Sensitivity of PHF-02 is Approx. 40 to 60W/m2/mV, therefore, if the
resolution of 1W/ms is required datalogger with 10 micro V (= 0.01mV) would
be required.
[Feature]
- High Sensitivity
- Low internal resistance
- Indivisual sensitivity values
- High Sensitivity
- Low internal resistance
- Indivisual sensitivity values
Specification
| PHF-02 Specification | |
| Standard Sensitivity | Approx. 40 to 60 W/m2/mV |
| Standard Internal Resistance | Approx. 2 Ohm |
| Dimension | 40 (Φ) x 5(t) mm |
| Material | Epoxy resin, Aluminum |
| Operating Temperature Range | -30 to +70 degC |
| Cable | 10m duplex shield cable (Standard) |
| PHF-03 Specification | |
| Standard Sensitivity | Approx. 7 to 9 W/m2/mV |
| Standard Internal Resistance | Approx. 5 Ohm |
| Dimension | 76 (Φ） x 6(t) mm |
| Material | Eposy resin, Aluminum |
| Operating Temperature Range | -30 to +70 degC |
| Cable | 10m duplex shield cable (Standard) |